Meter

8" Touch Screen Digitizer for LQ080Y5DZ05 Ford Lincoln Sync 3 Radio Navigation Compatible with the following vehicles: Ford C-Max (2013-2018) Ford Edge (2011-2018) Ford Escape (2013-2018) Ford Explorer (2014-2018) Ford F150 F250 F350 (2013-2018) Ford Focus (2012-2018) Ford Fusion (2013-2018) Lincoln MKS (2013-2018) Lincoln MKC (2015-2018) Lincoln MKX (2011-2018) Lincoln MKZ (2013-2018) Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 8.0 inch (192*120mm). - Interface: 60-Pins. - Thickness: 1.5mm. - Main materal: Glass - Length of FPC (flexible print circuit): 43mm. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. This replacement is for SYNC 3 8.0 inch screen LQ080Y5DZ05, didn`t fit for SYNC 2 8.0 inch screen LQ080Y5DZ03. 2. The cable interface of the touch screen is 60-pins. 3. Installation instructions not included. Tool not included. 4. It is only a touch panel, not including a LCD display. 5. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 6. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package Included: 1PCS 8" Touch Screen Digitizer for LQ080Y5DZ05 Ford Lincoln Sync 3 Radio Navigation

7" Touch Screen Digitizer for LA070WV2 Toyota Tundra Radio Navigation Compatible with the following vehicles: Toyota Tundra (2014-2019) (Navigation & Non-Navigation, JBL & Non JBL) Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 7.0 inch (163*101mm). - View Area: 154.45*93.24mm. - Interface: 8-Pins. - Thickness: 1.3mm. - Main materal: Glass - Length of FPC (flexible print circuit): 79mm. - Working Voltage: 5V. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable interface of the touch screen is 8-pins. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package Included: 1PCS 7" Touch Screen Digitizer for LA070WV2 Toyota Tundra Radio Navigation

Omron TP-3108S1 touch screen for NT31-ST123-V3, KG057QV1CA Application: Omron NT31-ST123-V3 Size: 148x110mm, 28pin, 31mm wide cable

7" Touch Screen Digitizer for LAM070G004A Peugeot 208 2008 308 Citroen C5 C4l C 3xr Application: Peugeot 208 2008 308 Citroen C5 C4l C3xr. Replacement for SANYO LAM070G004A, SONY GCX156AKM-E, GCX156AKS-T02 and BOE A2C00730002-01. Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 7.0 inch (167*104.3mm). - Interface: 4-Pin. - Thickness: 1.9mm - Length of FPC (flexible print circuit) / Ribbon cable connector: 49.2mm. - Working voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. Installation instructions not included. Tool not included. 2. It is only a touch panel, not including a LCD display. 3. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 4. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8" Touch Screen Digitizer for LA080WV2 Toyota Highlander Radio made by Panasonic Compatible with the following vehicles with Radios made by Panasonic (not by PIONEER): Toyota Highlander cars and trucks (2014-2019) (JBL & Non JBL navigation). Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 8.0 inch (185.5*112 mm). - View Area: 176.64*99.36 mm. - Interface: 8-Pin. - Thickness: 1.3mm - Length of FPC (flexible print circuit) / Ribbon cable connector: 46.9mm. - Working voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. Installation instructions not included. Tool not included. 2. It is only a touch panel, not including a LCD display. 3. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 4. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Uconnect 3C 8.4A VP3 8.4AN VP4 Radio Compatible with the following vehicles (Be specifically for the Uconnect 3C 8.4" VP3 and VP4 CA NA MX ROW EU Infotainment Radio (DJ084NA-01A)): Jeep Grand Cherokee Summit Limited Trailhawk SRT & Cherokee (2014-2017) Jeep Cherokee (2014-2018) Chrysler 200 300 (2015-2016) Dodge RAM 1500 2500 3500 Chassis Cab (2013-2017) Dodge Viper SRT (2014-2017) Dodge Challenger (2015-2016) Dodge Durango (2014-2017) Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 8.4 inch (185*142mm). - Interface: 8-Pin. - Thickness: 1.9mm - Length of FPC (flexible print circuit): 59.5mm. - Working voltage: 5V. - Main material: Glass. - Replacing touch screen: Loss of response to touch commands, dented, faded, scratched, cracked, dead pixels, or the polarized protection is wearing off. Please check and make sure that this touchscreen is made for your radio just because even though your car is on this list, it doesn t mean it is made for your radio. Car has about 5 different radio models which are made by different radio manufacturers. This replacement is specifically for the Uconnect 3C 8.4" VP3 and VP4 CA NA MX ROW EU Infotainment Radio ( DJ084NA-01A ). Attention: 1. The cable (FPC) interface of the touch screen digitizer is 8-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

7" Touch Screen Digitizer for C070VTN01 Toyota RAV4 Camry Radios Navigation Compatible with the following vehicles (Navigation Radios made by fujitsu ten): (JBL & Non JBL & Navigation & Non Navigation). Toyota RAV4 (2014-2018) Toyota Camry (2015-2017) Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 7.0 inch (169*104mm). - Interface: 12-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 32.5mm. - Working voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 12-pins. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8" Touch Screen Digitizer for LQ080Y5DZ03 on Ford Lincoln Sync 2 Radio Navigation Compatible with the following vehicles: Ford Explorer (2014-2015) Ford F150/250/350 (2013-2015) Ford Focus (2012-2014) Ford C-Max (2013-2014) Ford Escape (2013-2014) Ford Edge (2011-2014) Ford Fusion (2013-2015) Lincoln MKX (2011-2015) Lincoln MKS (2013-2015) Lincoln MKZ (2013-2015) Lincoln MKC 2015 Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 8 inch (191*121mm). - Interface: 4-Pins. - Thickness: 1.90mm. - Length of FPC (flexible print circuit): 91mm. - Working Voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, dented, faded, scratched, cracked, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable interface of the touch screen is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Dodge Journey Uconnect 3 RB5 RE2 Radio Navigation Display Monitor Compatible with the following vehicles: Dodge Journey (2011-2018) Display OEM Number LAJ084T001A Radio Navigation Monitor OEM Number: 05064993AD, 05064993AF, 05064993AG, 05064993AH, 05064993AI Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (184*141mm). - Cable Interface: 4-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 57mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Dodge Dart Uconnect 3 RB5 RE2 Radio Navigation Display Monitor Compatible with the following vehicles: Dodge Dart (2013-2017) Display OEM Number LAJ084T001A Radio Navigation Monitor OEM Number: 05091143AA, 05091143AB, 05091143AC, 05091143AD, 05091143AE Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (184*141mm). - Cable Interface: 4-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 57mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer