Product name:SCANIA Truck Air Filter OEM No.: 1485187 1485188 1486634 The air filter is important to ensure clean operation of truck diesel engine parts, this product uses high-grade materials, is a cheap and good products. use for:SCANIA P/G/R/T Series truck
Product name:SCANIA Truck Switch, Splitter Gearbox OEM No.: 1319557 for splitter transmission Manual Transmission Splitter Gearbox Switch use for:Scania 2/3 Series Scania 4 Series Scania Bus Scania P/G/R/T Series
Application :
Scania 2/3 Series Scania 4 Series Scania Bus Scania P/G/R/T Series
Product name:SCANIA Truck Air Drier OEM No.: 1751374 489834 HALDEX:87295 Maximum Air System Protection Available with or without oil separator use for:SCANIA 4 Series truck
Product name:SCANIA Truck Retrofit Kit, soot filter OEM No.: 1500455 1420278 1337750 1378553 1800871 1484094 1800879 1378553 Back pressure mufflers are not appropriate will cause an increase in temperature and soot emissions, thereby weakening the engine power, and lead to increased fuel consumption. If the muffler is not proper back pressure, engine oil and gas mixture will result in an error being inhalation, even before the end of the working stroke of the engine Have been discharged into the combustion chamber, this will allow the engine s efficiency will be severely affected. Under the normal operation of the truck, the muffler Will withstand up to 20G, and pulse pressure of up to 15 KPA, operating temperature-20 ° c and +500 ° C fluctuate between, is also subject to other potential infection Corrosion, salt-spray fog, on a road vehicle emissions Corrosive gas and so on. Scania in the silencer s endurance In testing, faithfully reproduce all these conditions, even Vibrations and other equipment was used to simulate extreme work To ensure that products meet the design strength of the Scania and With durable and high quality. use for:Scania 4 Series Scania Bus Scania P/G/R/T Series
Product name:SCANIA Temperature Sensor OEM No.:2096380 Temperatures are important parameters to reflect engine heat load. In order to ensure that control systems are able to precisely control engine work parameters, must be ready to monitor engine coolant temperature, intake air temperature and exhaust temperature, to revision control parameters, calculation of suction cylinder of air mass flow and exhaust gas purification. Coolant temperature sensor (Coolant Temperature Sensor,CTS) commonly referred to as water temperature sensors, installed on the engine cooling liquid outlet pipe, its function is to test engine coolant temperature, and temperature signals into electric signals to the ECU. ECU signal correction according to engine temperature fuel injection timing and ignition time, so that the engine running condition in the best State. use for:SCANIA 4 series truck