Tire Valves

Tire Valves Snap-In Nickel Or Chrome Or Rubber-Covered For 11.5 (.453 dia.) Rim Holes Item NO. ETRTO NO. Eff.Height (mm) Lengthmm Angle ° Parts (REF NO.) Core Cap TR413L/-CR PO-1NI/CR 41 37 90 C1 DT TR412L/-CR PVR 70NI/CR 22 30 90

The Tubeless Snap-in Type valves are mainly for high pressure application for use to 720kPa(100PSI). Maximum Cold inflation pressure. For 11.5 (.453 dia.) Rim Holes Item NO. ETRTO NO. Eff.length Length Parts (REF NO.) mm in mm Core Sleeve Cap TR600HP-AC V3.23.1AC 32 1.27 43 CAS600 ANT2 TR600HP V3.23.1 32 1.27 43 C1 / VC8 TR602HP V3.23.2 51 2 62 / VC8 For 16 (.625 dia.) Rim Holes Item NO. ETRTO NO. Eff.length Length Parts (REF NO.) mm in mm Core Sleeve Cap TR801HP 33 1.31 45 C1 / VC8 TR802HP 51 2 63 / VC8

The snap-in type can be quickly mounted to the rim.It is flexble in nature, so it may provide complete air-seal even when it is bent for airservice or tire pressure check. Made of special rubber(as EPDM)compound to resist o zone damage and prevent from ,premature deterioration caused by rim hole compression and cold, its Maximum inflation is 420 kPa(60P.S.I) Item NO. Stem NO. Parts (Item.NO.) Core Sleeve Cap TR412AL-R/Y/B TR412 AS412-R/Y/B TR413AL-R/Y/B TR413 AS413-R/Y/B ANT-R/Y/B or TR414AL-R/Y/B TR414 C1 AS414-R/Y/B ET-R/Y/B or TR418AL-R/Y/B TR418 AS418-R/Y/B GT-R/Y/B

The snap-in type can be quickly mounted to the rim.It is flexble in nature, so it may provide complete air-seal even when it is bent for airservice or tire pressure check. Made of special rubber(as EPDM)compound to resist o zone damage and prevent from ,premature deterioration caused by rim hole compression and cold, its Maximum inflation is 420 kPa(60P.S.I) Item NO. Stem NO. Parts Rim Hole (Item.NO.) Core Sleeve Cap (mm/in) TR413C TR413 CS12 or CS16 TR414C TR414 CS16 or CS18 11.5/.453 TR418C TR418 C1 CS30 AT2 or GT2 TR415C TR415 CS12 or CS16 16/.625 TR414LC TR414L CS18 or CS22 11.5/.453

The snap-in type can be quickly mounted to the rim.It is flexble in nature, so it may provide complete air-seal even when it is bent for airservice or tire pressure check. Made of special rubber(as EPDM)compound to resist o zone damage and prevent from ,premature deterioration caused by rim hole compression and cold, its Maximum inflation is 420 kPa(60P.S.I) TR414-I, TR415-I, TR438-I, TR429-I

The snap-in type can be quickly mounted to the rim.It is flexble in nature, so it may provide complete air-seal even when it is bent for airservice or tire pressure check. Made of special rubber(as EPDM)compound to resist o zone damage and prevent from ,premature deterioration caused by rim hole compression and cold, its Maximum inflation is 420 kPa(60P.S.I) TR412-G, TR413-G, TR414-G, TR418-G, TR415-G, TR429-G

The snap-in type can be quickly mounted to the rim.It is flexble in nature, so it may provide complete air-seal even when it is bent for airservice or tire pressure check. Made of special rubber(as EPDM)compound to resist o zone damage and prevent from ,premature deterioration caused by rim hole compression and cold, its Maximum inflation is 420 kPa(60P.S.I) TR412S TR438 TR429 / V2.03.5 V2.03.9 22/7/8 32/1-1/4 51/2

The snap-in type can be quickly mounted to the rim.It is flexble in nature, so it may provide complete air-seal even when it is bent for airservice or tire pressure check. Made of special rubber(as EPDM)compound to resist o zone damage and prevent from ,premature deterioration caused by rim hole compression and cold, its Maximum inflation is 420 kPa(60P.S.I) Item No. (TR NO.) Etrto No. (REF.NO.) Eff.Length (mm/in) TR415 TR420 TR425 V2.03.3 / / 32/1-1/4 45/1-3/4 51/2

The snap-in type can be quickly mounted to the rim.It is flexble in nature, so it may provide complete air-seal even when it is bent for airservice or tire pressure check. Made of special rubber(as EPDM)compound to resist o zone damage and prevent from ,premature deterioration caused by rim hole compression and cold, its Maximum inflation is 420 kPa(60P.S.I) Item No. (TR NO.) Etrto No. (REF.NO.) Eff.Length (mm/in) TR412 TR413 TR414 TR414L TR418 TR423 PVR21 V2.03.6 V2.03.1 V2.03.2 V2.03.8 V2.03.4 / PVR21 22/7/8 32/1-1/4 38/1-1/2 45/1-3/4 51/2 64/2-1/2 35/1-3/8

Our company specialist in the tire balance weight . The tire balance weight of the raw material is ZN ,FE and LEAD. The specification is clip on tire balance weight and stick on tire balance weight . Industrial art is ZN plated and plastic coated . We also can make it as the client demand .