Touch panel

6.1" Touch Screen Digitizer LA061WV1 for Toyota 4Runner Tacoma Highlander Tundra Corolla Radio CD Player E7028 Compatible with the Following Vehicles, Radios made by Panasonic Toyota 4Runner (2014-2019) Only The Navigation JBL and Non JBL Toyota Tacoma (2014-2019) Navigation and Non Navigation, JBL and Non JBL Toyota Tundra (2014-2017) Only The Basic Sound Non Navigation Toyota Corolla (2012-2013) Toyota Highlander (2012-2013) Toyota Avalon (2014-2016) This is 8 Wired Resistive Digitizer for LA061WV1 (TD)(01), Radios made by Panasonic Repairable Faceplate IDs: E7028 510145, 510139, 510140, 57079, 57080, 57082, 57085, 57086, 510146, 510422 P10121, P10485, P10544, P10545 Repairable Part Numbers: 86120-35530, 86100-35440, 86100-35351, 86100-35350, 86100-35360, 86100-35450, 86100-35161, 86100-35260, 86100-35270, 86100-35190, 86100-35211, 86100-35161, 86100-35260, 86100-35160, 86140-35010, 86140-35050, 86140-35011, 86140-35051, 86140-35090, 86140-35120, 86140-35130, 86100-35240, 86100-35240, 86100-35352, 86100-35412, 86100-35420, 86100-32320, 86100-35411, 86100-35500, 86100-35191, 86100-35541, 86100-32320, 86100-35320, 86100-32320, 86100-35411, 86100-35500, 86140-04150, 86140-04120, 86140-0E051, 86804-04030, 86100-04080, 86100-04151, 86100-0C16 Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 6.1 inch (148*81mm). - Interface: 8-Pins. - Thickness: 1.90mm. - Length of FPC (flexible print circuit): 47.5mm. - Working Voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, dented, faded, scratched, cracked, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable interface of the touch screen is 8-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8" 8 Wire Touch Screen Digitizer for Toyota Land Cruiser 200 and Lexus LS460 LX570 GS300, GX460, RX350 Application: Toyota Land Cruiser 200 (2004-2007) Lexus LS460 (2007-2009) Lexus GS300, GS350 (2008-2010) Lexus LX570 (2010-2013) Lexus GX460 (2010-2015) Lexus GX400, RX350, RX450 (2014-2015) According to Screen Part Number: LTA080B450F, LTA080B451F, LTA080B040F, LT080AB92A00, LT080CA31000, LTA080B923F, LTA080B922F, LTA080B540F If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (191.5*123mm). - Cable Interface: 8-Pin. - Length of FPC (flexible print circuit): 40mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 8-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

6.5" Touch Screen Digitizer for Ford Sync 1 LTA065B1D1F Radio Navigation Compatible with the following vehicles: Ford Fusion (2008-2009) Ford Mustang (2007-2009) Ford E150/E250 (2009-2013) Ford Explorer (2006-2010) Ford F150 (2007-2009) (2009 is a radio style split year, current radio must look similar to one pictured to work) (with subwoofer) Ford F250/F350 (2008-2011) Ford Fusion (2006-2009) Lincoln MKZ (2008-2009) Lincoln MKX (2008-2010) Mercury Mountaineer (2006-2010) Mercury Milan (2006-2009) Fit for Ford Fusion SYNC 1 (SYNC with Voice-Activated Navigation) radio / stereo (with subwoofer) 2006 / 2007 / 2008 / 2009. According to Screen OEM Number: LTA065B1D1F Interchange Part Number: 9L1T-18K931, 9L1T-18K931-CA, 9L1T-18K931-CB, 9L1T-18K931-CC 8R3T-18K931-EA, 8E5T-18K931-EA, 7L2T-18K931-AE, 7L2T18K931CB, 7L2T18K931CC, 7L2T18K931CA, 7L2T18K931AD, 7L2T18K931AC, 7L2T18K931AB, 7L2T18K931AA, 7L2Z18806FA, 7L2Z18806D, 8H6T-18K931-BC, 8A1T-18K931-CA, 8T4Z18806F, 8T4T18K931BA If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! Features & Specifications: - 100% new and high quality, good operation. - Size: 6.5 inch (155x89mm). (not 4.2-inch, not 8.0-inch). - Cable Interface: 4-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 53mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. Installation instructions not included. Tool not included. 2. It is only a touch panel, not including a LCD display. 3. Please check the appearance and exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 4. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer We selling Touch Screen Glass Digitizer only, the radio navigation unit in picture as an application scenario instruction, not included for sale.

7" Touch Screen Digitizer for Mazda 3 CX-3 MX-5 Radio Navigation BHP1611J0D Application: Mazda 3 Radio Navigation (2014-2016) Mazda CX-3 Radio Navigation (2016-2017) Mazda MX-5 Radio Navigation (2017-2019) According to Screen Part Number: TM070RDZ38 If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! Radio Navigation OEM Number: BHP1611J0D, K40005A29F, ND1F611J0 Features & Specifications: - 100% new and high quality, good operation. - Size: 7 inch (178/184*112mm). - Cable Interface: 36-Pin. - Length of FPC (flexible print circuit): 26mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 36-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

10.4" 8 Wire Touch Screen Digitizer for John Deer GreenStar GS2 2600 Computer Display Reference OEM Number: PF80877, PF81076, PF81185, PF81378, PG200402 If your LCD display still show the map, character, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with old touchscreen! We would mail you install guide video as you require after ordered. Features & Specifications: - 100% new and high quality, good operation. - Size: 10.4 inch (226*177.5mm). - Cable Interface: 8-Pin. - Length of FPC (flexible print circuit): 99.5mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 8-pin. 2. It is only a touch panel, not including a LCD display. 3. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 4. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8" Touch Panel for Buik Verano, Opel Vauxhall Astra, Chevrolet, Cadillac Radio Navigation Application: Buik Verano, Opel Vauxhall Astra, Chevrolet, Cadillac Radio Navigation According to Display OEM Number: LQ080Y5DZ10, LQ080Y5DZ06 If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (242x125.5mm). - Cable Interface: 60-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 53mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. Installation instructions not included. Tool not included. 2. It is only a touch panel, not including a LCD display. 3. Please check the appearance and exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 4. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

7" Touch Screen Digitizer for Honda Accord Radio Navigation Display Compatible with the following vehicles: Honda Accord (2016-2017) Display OEM Number LA070WV6(SL)(01) If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! Radio Navigation OEM Number: 39101-T2F-A61, 39101-T2F-A71, 39101-T2F-C71, 39101-T2F-C72, 39101-T3L-A71, 39101-T2F-C61, 39101-T2F-C62, 39101-T2W-C71, 39101-T2W-C72, 39101-T3L-A51, 39101-T2F-A91, 39101-T2F-A92, 39101-T2F-C91, 39101-T2F-C92, 39101-T2F-C93, 39101-T3L-A91, 39101-T3L-A92, 39101-T3L-C91, 39101-T3L-C92 Features & Specifications: - 100% new and high quality, good operation. - Size: 7 inch (204*110mm). - Cable Interface: 60-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 40mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 60-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

7" Touch Panel for Porsche PCM 3.1 Car Navigation Application: Porsche Macan (2015-2016) Porsche Cayman (2012-2016) Porsche Panamera (2010-2016) Porsche Boxster (2012-2016) Porsche Cayenne (2011-2016) Porsche 911 (997) (2012-2016) Known screen part numbers for PCM 3.1 head unit: L5F30720T15, L5F30720T10, L5F30720T11, L5F30720P01, L5F30720T19, L5F30720P03 GCX062AKM-E, GCX062AKS-E If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! PLEASE NOTE: This listing is NOT for a replacement LCD unit, or a replacement PMC3.1 navigation system! This listing is for a replacement touchscreen digitizer only. This touchscreen digitizer will not fix a non-working LCD (blank screen), it will only fix a non-responsive touchscreen. Attention: 1. The cable interface of the touch screen is 4-pins. 2. It is only a touch panel, not including a LCD display. 3. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it.

6.5" Touch Screen Digitizer for Dodge Chrysler Jeep Mygig 430 RBZ, 430N RHB Navigation 10-18 Application: Jeep Wranger (all models) (2007-2017) Jeep Liberty (2008-2012) Dodge Nitro (2007-2012) Dodge Grand Caravan (2008-2015) Dodge Ram 1500 2009 Dodge Ram (all models) (2010-2012) Dodge Journey (2009-2010) Ram C/V 2015 Chrysler Town and Country (2008-2016) Compatible with the following part numbers: P05064678AC P05064678AD P05064678AE P05064678AF P05064678AG P05064678AH P05064678AI P05064879AC P05064879AD P05064879AE P05064879AF P05064879AG P05064879AH P05064879AI P05091170AC P05091170AD P05091170AE P05091170AF P05091170AG P05091170AH P05091170AI P05091201AC P05091201AD P05091201AE P05091201AF P05091201AG P05091201AH P05091201AI P05091327AC P05091327AD P05091327AE P05091327AF P05091327AG P05091327AH P05091327AI P06064829 P05091186 P05091338 P05064845 P05091204 P05091331 P082212501 P082212477 P082212500 REPLACEMENT SCREEN MODEL NUMBER LQ065T5GG64 MAKE SURE YOUR RADIO IS MADE BY MITSUBISHI NOT HARMAN AUTOMOTIVE If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! PLEASE NOTE: This listing is NOT for a replacement LCD unit, or a replacement 430 RBZ, 430N RHB navigation system! This listing is for a replacement touchscreen digitizer only. This touchscreen digitizer will not fix a non-working LCD (blank screen), it will only fix a non-responsive touchscreen. Attention: 1. The cable interface of the touch screen is 8-pins. 2. It is only a touch panel, not including a LCD display. 3. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it.

7" Touch Screen Digitizer for Nissan Frontier Navigation Radio Made by Panasonic Compatible with the following vehicles: Nissan Frontier Navigation Radio Made by Panasonic (2018-2019) Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (164*92mm). - Cable Interface: 8-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 80.5mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 8-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer