Touch panel

8" Touch Screen Digitizer for LA080WV2 Toyota Highlander Radio made by Panasonic Compatible with the following vehicles with Radios made by Panasonic (not by PIONEER): Toyota Highlander cars and trucks (2014-2019) (JBL & Non JBL navigation). Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 8.0 inch (185.5*112 mm). - View Area: 176.64*99.36 mm. - Interface: 8-Pin. - Thickness: 1.3mm - Length of FPC (flexible print circuit) / Ribbon cable connector: 46.9mm. - Working voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. Installation instructions not included. Tool not included. 2. It is only a touch panel, not including a LCD display. 3. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 4. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Uconnect 3C 8.4A VP3 8.4AN VP4 Radio Compatible with the following vehicles (Be specifically for the Uconnect 3C 8.4" VP3 and VP4 CA NA MX ROW EU Infotainment Radio (DJ084NA-01A)): Jeep Grand Cherokee Summit Limited Trailhawk SRT & Cherokee (2014-2017) Jeep Cherokee (2014-2018) Chrysler 200 300 (2015-2016) Dodge RAM 1500 2500 3500 Chassis Cab (2013-2017) Dodge Viper SRT (2014-2017) Dodge Challenger (2015-2016) Dodge Durango (2014-2017) Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 8.4 inch (185*142mm). - Interface: 8-Pin. - Thickness: 1.9mm - Length of FPC (flexible print circuit): 59.5mm. - Working voltage: 5V. - Main material: Glass. - Replacing touch screen: Loss of response to touch commands, dented, faded, scratched, cracked, dead pixels, or the polarized protection is wearing off. Please check and make sure that this touchscreen is made for your radio just because even though your car is on this list, it doesn t mean it is made for your radio. Car has about 5 different radio models which are made by different radio manufacturers. This replacement is specifically for the Uconnect 3C 8.4" VP3 and VP4 CA NA MX ROW EU Infotainment Radio ( DJ084NA-01A ). Attention: 1. The cable (FPC) interface of the touch screen digitizer is 8-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

7" Touch Screen Digitizer for C070VTN01 Toyota RAV4 Camry Radios Navigation Compatible with the following vehicles (Navigation Radios made by fujitsu ten): (JBL & Non JBL & Navigation & Non Navigation). Toyota RAV4 (2014-2018) Toyota Camry (2015-2017) Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 7.0 inch (169*104mm). - Interface: 12-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 32.5mm. - Working voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 12-pins. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8" Touch Screen Digitizer for LQ080Y5DZ03 on Ford Lincoln Sync 2 Radio Navigation Compatible with the following vehicles: Ford Explorer (2014-2015) Ford F150/250/350 (2013-2015) Ford Focus (2012-2014) Ford C-Max (2013-2014) Ford Escape (2013-2014) Ford Edge (2011-2014) Ford Fusion (2013-2015) Lincoln MKX (2011-2015) Lincoln MKS (2013-2015) Lincoln MKZ (2013-2015) Lincoln MKC 2015 Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 8 inch (191*121mm). - Interface: 4-Pins. - Thickness: 1.90mm. - Length of FPC (flexible print circuit): 91mm. - Working Voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, dented, faded, scratched, cracked, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable interface of the touch screen is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Dodge Journey Uconnect 3 RB5 RE2 Radio Navigation Display Monitor Compatible with the following vehicles: Dodge Journey (2011-2018) Display OEM Number LAJ084T001A Radio Navigation Monitor OEM Number: 05064993AD, 05064993AF, 05064993AG, 05064993AH, 05064993AI Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (184*141mm). - Cable Interface: 4-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 57mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Dodge Dart Uconnect 3 RB5 RE2 Radio Navigation Display Monitor Compatible with the following vehicles: Dodge Dart (2013-2017) Display OEM Number LAJ084T001A Radio Navigation Monitor OEM Number: 05091143AA, 05091143AB, 05091143AC, 05091143AD, 05091143AE Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (184*141mm). - Cable Interface: 4-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 57mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Dodge Charger Uconnect 3 RB5 RE2 Radio Navigation Display Monitor Compatible with the following vehicles: Dodge Charger (2011-2014) Display OEM Number LAJ084T001A Radio Navigation Monitor OEM Number: 5064798AH, 5064798AE, 5064798AG, 5064798AF, 5064798AD Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (184*141mm). - Cable Interface: 4-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 57mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Maserati Ghibli Radio Navigation Display Monitor Compatible with the following vehicles: Maserati Ghibli (2014-2017) Display OEM Number LAJ084T001A Radio Navigation Monitor OEM Number: 68212905AA, 670007290 Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (184*141mm). - Cable Interface: 4-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 57mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable (FPC) interface of the touch screen digitizer is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

8.4" Touch Screen Digitizer for Chrysler Dodge Maserati RB5 RE2 Radio Compatible with the following vehicles: (Be specifically for the Uconnect 3 with 8.4-inch touch screen RE2 and RB5 radios made by Panasonic) Chrysler 300 (2011-2014) Dodge Charger (2011-2014) Dodge Journey (2011-2018) Dodge Dart (2013-2017) Maserati Ghibli (2014-2017) Features & Specifications: - 100% new and high quality, good operation. - Size: 8 inch (184*141mm). - Cable Interface: 4-Pin. - Thickness: 1.5mm - Length of FPC (flexible print circuit): 57mm. - Working voltage: 5V. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Please check and make sure that this touchscreen is made for your radio just because even though your car is on this list, it doesn t mean it is made for your radio. There are have about 5 different radio models which are made by different radio manufacturers. This replacement is specifically for the Uconnect 3 with 8.4 inch touch screen RE2 and RB5 radios manufactured by Panasonic, not for other manufacturers . Attention: 1. The cable (FPC) interface of the touch screen digitizer is 4-pin. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

6.1" Touch Screen Digitizer for Toyota 14-16 Camry Radio Stereo 100366 100614 Radios made by fujitsu ten Toyota Camry 2014 1/2- 2016 (WILL NOT WORK ON THE EARLY 2014) MAKE SURE YOU HAVE THE TOUCHSCREEN WITH THE PLUG IN THE MIDDLE JUST LIKE IN THE PIC 12 PIN And this is 8 Wired 12pins Resistive Digitizer for LA061WQ1 (TD)(04), if yours is 4 Wired 8pins Resistive for LA061WQ1(TD)(02) or LA061WQ1(TD)(05) that it not fit for you. Reference Stereo Unit Part Number: 86140-06390, 86140-06680, 86140-06660, 86140-06070, 86140-06400 Faceplate ID: 100366, 100614, 100201, 10020, P11224 SOME CARS HAVE BIGGER SCREENS, AND SOME CARS THE RADIO ARE MADE BY PIONEER , DENSO , PANASONIC , THIS TOUCH-SCREEN WE SELLING IS FOR RADIOS MADE BY FUJITSU TEN SIZE 6.1" FOR TOYOTA Original Screen Part Number: LG LA061WQ1(TD)(04) (Made in CHINA) SOME CARS HAVE BIGGER SCREENS AND SOME CARS THE RADIO ARE MADE BY PIONEER, DENSO, PANASONIC THIS TOUCH-SCREEN IS FOR RADIOS MADE BY Fujitsu ten FOR TOYOTA SIZE 6.1" This is your opportunity to purchase a LG 6.1 inch Touch-Screen Digitizer. With this piece there s no need to spend over a thousand dollars at a Toyota dealership to replace your entire head unit. If your screen has: loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off, this is the part you need! Simply replace your LCD and enjoy the look and functionality of a brand new display! TFT (LCD) Technology. You cannot purchase this from a TOYOTA dealership, they will want to sell you the entire $2900+ monitor. Please see photos.