Touch panel

7" Touch Screen Digitizer for Toyota Sequoia JBL E7013 Navigation LQ070T5GA01/GC01 2008-2012 This listing is for a replacement touchscreen for the 2008 - 2012 Toyota Sequoia JBL navigation system with a faceplate ID of E7013. This is all you need to repair a broken / frozen / unresponsive touchscreen! Toyota Reference Part No: 86120-0C220, 861200C220, 86120-0C230, 861200C230 E7013 Screen Size: 7 inch 169*99mm If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! PLEASE NOTE: This listing is NOT for a replacement LCD unit, or a replacement JBL navigation system! This listing is for a replacement touchscreen digitizer only. This touchscreen digitizer will not fix a non-working LCD (blank screen), it will only fix a non-responsive touchscreen. We would share you how to move out your JBL navigation unit from your car if you required. Attention: 1. The cable interface of the touch screen is 8-pins. 2. It is only a touch panel, not including a LCD display. 3. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it.

7" Touch Screen Digitizer for Toyota Sienna JBL E7027 Navigation LQ070T5GA01/GC01 2011-2014 This listing is for a replacement touchscreen for the 2011 - 2014 Toyota Sienna JBL navigation system with a faceplate ID of E7027. This is all you need to repair a broken / frozen / unresponsive touchscreen! Toyota Reference Part No: 86120-08250, 8612008250 E7027 Screen Size: 7 inch 169*99mm If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! PLEASE NOTE: This listing is NOT for a replacement LCD unit, or a replacement JBL navigation system! This listing is for a replacement touchscreen digitizer only. This touchscreen digitizer will not fix a non-working LCD (blank screen), it will only fix a non-responsive touchscreen. We would share you how to move out your JBL navigation unit from your car if you required. Attention: 1. The cable interface of the touch screen is 8-pins. 2. It is only a touch panel, not including a LCD display. 3. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it.

7" Touch Screen Digitizer for Toyota Prius 2010-2011 E7022 JBL Navigation LQ070T5GA01 This listing is for a replacement touchscreen for the 2010 - 2011 Toyota Prius JBL navigation system with a faceplate ID of E7022 (printed on the bezel just below the LCD screen). This is all you need to repair a broken / frozen / unresponsive touchscreen! If your LCD display still show the map, music, and other info, but won t respond to touches to the screen or the buttons to the side of your display work correctly, but when you touch the display, nothing happens, to replace the touchscreen, which is a thin piece of clear glass that sits on top of the LCD display that will solve your problems. This is a common problem with the OEM navigation touchscreen! PLEASE NOTE: This listing is NOT for a replacement LCD unit, or a replacement JBL navigation system! This listing is for a replacement touchscreen digitizer only. This touchscreen digitizer will not fix a non-working LCD (blank screen), it will only fix a non-responsive touchscreen. We would share you how to move out your JBL navigation unit from your car if you required. Attention: 1. The cable interface of the touch screen is 8-pins. 2. It is only a touch panel, not including a LCD display. 3. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it.

7" Touch Screen Digitizer for Toyota JBL Navigation LQ070T5GA01 86120-0C330 Made by Denso 08-14 Compatible with the following Toyota vehicles: Sienna (2011-2014) Sequoia (2008-2012) will not work on 2013 up sequoia Tundra (2008-2013) Camry (2007-2009) Venza (2009-2012) 4 Runner (2010-2013) Prius (2010-2011) Highlander (2008-2014) Will not fit for 8" navigation screen of Highlander Screen Part Number: LQ070T5GC01, LQ070T5GA01, LQ0DA52115, LQ0DAS1387 Toyota Part No: 86120-0C330, 86120-0C220, 86120-0C230, 86120-06390, 86120-33A10, 86120-06510, 86140-0T061, 86120-35530, 86120-48M70, 86120-08250, 86120-47390 E7011, E7012, E7021, E7022, E7024, E7026, E7027, E7028 Features & Specifications: - High quality and good operation. - Fit for Toyota JBL Navigation Made by Denso. - Size: 7 inch (169*99mm). - Interface: 8-Pin. - Thickness: 1.5mm - Main material: Glass. - Working Voltage: 5V. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable interface of the touch screen is 8-pins. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package Included: 1PCS 7" Touch Screen Digitizer for Toyota JBL Navigation Made by Denso 08-14

6.5" Touch Screen Digitizer for Jeep Uconnect Mygig REN RER RHR 07-10 Compatible with the following vehicles: Chrysler 300 (2008-2010) Chrysler Aspen (2008-2009) Chrysler Sebring (2007-2010) Chrysler Town & Count (2008-2010) Dodge Avenger (2007-2010) Dodge Caliber (2009-2010) Dodge Challenger (2008-2010) Dodge Charger (2008-2010) Dodge Dakota (2008-2010) Dodge Durango (2008-2009) Dodge Grand Caravan (2008-2010) Dodge Journey (2008-2010) Dodge Nitro (2007-2010) Dodge Ram 1500 (2009-2010) Dodge Ram 2500 2010 Dodge Ram 3500 2010 Dodge Magnum 2008 Jeep Commander (2008-2010) Jeep Compass (2009-2010) Jeep Grand Cherokee (2008-2010) Jeep Patriot (2009-2010) Jeep Liberty (2008-2010) Jeep Wrangler (2007-2010) Features & Specifications: - Brand new, high quality and good operation. - Fit for Jeep, Dodge, Chrysler. - Size: 6.5 inch (153.5*86mm). - Interface: 8-Pin. - Thickness: 1.5mm - Main material: Glass. - Working Voltage: 5V. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable interface of the touch screen is 8-pins. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer

7" Touch Screen Digitizer for Hyundai Sonata Veloster LB070WV7 LMS700KF30 TM070 Navigation 8Pins Compatible with the following Toyota vehicles: Hyundai Sonata Veloster (2013-2016) Kia Sorento Soul (2013-2016) Attention: This is 8 wired resistive version, if your touch screen is 4 wired resistive that you could order eBay item number: 254709281095 , Screen Part Number: LMS700KF30 TM070, LB070WV7 (TD)(01) Features & Specifications: - High quality and good operation. - Fit for Hyundai Sonata Veloster and Kia Sorento Soul - Size: 7 inch (165*104mm). - Interface: 8-Pin. - Thickness: 1.5mm - Main material: Glass. - Working Voltage: 5V. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable interface of the touch screen is 8-pins. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package Included: 1PCS 7" Touch Screen Digitizer for Hyundai Sonata Veloster

8" Touch Screen Digitizer for LQ080Y5DZ05 Ford Lincoln Sync 3 Radio Navigation Compatible with the following vehicles: Ford C-Max (2013-2018) Ford Edge (2011-2018) Ford Escape (2013-2018) Ford Explorer (2014-2018) Ford F150 F250 F350 (2013-2018) Ford Focus (2012-2018) Ford Fusion (2013-2018) Lincoln MKS (2013-2018) Lincoln MKC (2015-2018) Lincoln MKX (2011-2018) Lincoln MKZ (2013-2018) Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 8.0 inch (192*120mm). - Interface: 60-Pins. - Thickness: 1.5mm. - Main materal: Glass - Length of FPC (flexible print circuit): 43mm. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. This replacement is for SYNC 3 8.0 inch screen LQ080Y5DZ05, didn`t fit for SYNC 2 8.0 inch screen LQ080Y5DZ03. 2. The cable interface of the touch screen is 60-pins. 3. Installation instructions not included. Tool not included. 4. It is only a touch panel, not including a LCD display. 5. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 6. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package Included: 1PCS 8" Touch Screen Digitizer for LQ080Y5DZ05 Ford Lincoln Sync 3 Radio Navigation

7" Touch Screen Digitizer for LA070WV2 Toyota Tundra Radio Navigation Compatible with the following vehicles: Toyota Tundra (2014-2019) (Navigation & Non-Navigation, JBL & Non JBL) Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 7.0 inch (163*101mm). - View Area: 154.45*93.24mm. - Interface: 8-Pins. - Thickness: 1.3mm. - Main materal: Glass - Length of FPC (flexible print circuit): 79mm. - Working Voltage: 5V. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. The cable interface of the touch screen is 8-pins. 2. Installation instructions not included. Tool not included. 3. It is only a touch panel, not including a LCD display. 4. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 5. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package Included: 1PCS 7" Touch Screen Digitizer for LA070WV2 Toyota Tundra Radio Navigation

Omron TP-3108S1 touch screen for NT31-ST123-V3, KG057QV1CA Application: Omron NT31-ST123-V3 Size: 148x110mm, 28pin, 31mm wide cable

7" Touch Screen Digitizer for LAM070G004A Peugeot 208 2008 308 Citroen C5 C4l C 3xr Application: Peugeot 208 2008 308 Citroen C5 C4l C3xr. Replacement for SANYO LAM070G004A, SONY GCX156AKM-E, GCX156AKS-T02 and BOE A2C00730002-01. Features & Specifications: - 100% new and high quality, good operation. - Screen Size: 7.0 inch (167*104.3mm). - Interface: 4-Pin. - Thickness: 1.9mm - Length of FPC (flexible print circuit) / Ribbon cable connector: 49.2mm. - Working voltage: 5V. - Special feature: Support Can-Bus. - Main material: Glass. - TFT (LCD) technology. - Replacing touch screen: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off. Attention: 1. Installation instructions not included. Tool not included. 2. It is only a touch panel, not including a LCD display. 3. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us. 4. There is a layer of protective film on the surface of the panel. Please remove the protective film before using it. Package included: 1x Touch Screen Glass Digitizer